Phone number: (315) 930-4535
Email: sales@buyitsolutions.com
Address: 241-40 86th Rd Jamaica New York 11426 United States
EIN NUMBER: 93-2319428
D-U-N-S Number: 130972525
Skip to product information
Eaton
Tripp Lite NPOE-30W-1G-INT PoE adapter Gigabit Ethernet 30 V
SKU:
NPOE-30W-1G-INT
$56.46 USD
Pickup currently not available
✔
Factory-Sealed
Sourced from authorized distributors
✔
Manufacturer Warranty
Terms set by the brand
✔
Enterprise Expertise
Business Procurement
Free standard shipping over $2,500
Delivery estimates are based on product availability, destination, fulfillment method, and qualifying order requirements. 30-day returns; 20% restocking fee on non-defective returns. Shipping policy · Return policy
Loading documents...
Need Help Before You Order?
Check compatibility, availability, or volume pricing with an IT procurement specialist.
Enterprise IT Procurement Built for Business
Source servers, networking, storage, workstations, and business technology through established distribution channels with dedicated procurement support.
1,700+
Business Accounts Supported
32,000+
Enterprise Hardware Products Available
Fast, Reliable Procurement Support
Reach out for responsive product availability, part numbers, pricing, and additional hardware needs.
4–8 Hrs
Typical RFQ Response Target
Multi-Vendor
Hardware Sourcing
Keep Your IT Projects Moving
For business hardware purchases and larger deployments, get shipment information, order coordination, and delivery support.
Manufacturer Warranty Coverage
Eligible products include warranty coverage provided by the original manufacturer according to applicable brand and product terms.
Brand Warranty TermsFactory-Sealed HardwareOEM Support Eligibility
A Trusted Source for Enterprise Hardware
Source factory-sealed IT hardware through established technology distribution channels, with support for individual purchases, BOM requests, and larger business requirements.
112+
Technology Brands
32,000+
Hardware Products Available
Key Features
Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords
Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.
Saves You Time and Money on Unnecessary Equipment Updates
This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.
Expands Your PoE Network Up to 100 Meters
The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.
Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit to an outlet using the included power supply with the included UK or European power cords. LEDs indicate the unit is receiving power and is ready to transmit data.
Designed for Installation Almost Anywhere
Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.
Key Features
- Saves money by delivering 30W of power + data up to 100 m through existing cabling
- Extends power + data to any PoE or PoE+ device installed where no AC outlet is available
- Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)
- Quick and easy plug-and-play installation with no configuration necessary
- Compact, hand-sized plastic housing ready for mounting on any smooth surface
Description
Adds a PoE Device to Your LAN Without Adding a PoE SwitchNow you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.
Saves You Time and Money on Unnecessary Equipment Updates
This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.
Expands Your PoE Network Up to 100 Meters
The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.
Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit to an outlet using the included power supply with the included UK or European power cords. LEDs indicate the unit is receiving power and is ready to transmit data.
Designed for Installation Almost Anywhere
Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.
Specifications
| Network | |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
| Power over Ethernet (PoE) | Yes |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Cable types supported | Cat5, Cat5e, Cat6, Cat6a |
| Power over Ethernet (PoE) voltage | 30 V |
| Features | |
| Product colour | Black |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
| Country of origin | China |
| Package type | Box |
| LED indicators | Yes |
| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports | 2 |
| Power | |
| AC adapter output voltage | 53 V |
| Power over Ethernet (PoE) voltage | 30 V |
| Power consumption (typical) | 30 W |
| Input current | 0.75 A |
| AC adapter input voltage | 100 - 240 V |
| AC adapter frequency | 50/60 Hz |
| Technical details | |
| Number of products included | 1 pc(s) |
| Package width | 3.7" (94 mm) |
| Package height | 3.5" (88.9 mm) |
| Power over Ethernet (PoE) | Yes |
| Power consumption (typical) | 30 W |
| Operating temperature (T-T) | 32 - 122 °F |
| Input current | 0.75 A |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Sustainability compliance | Yes |
| Master (outer) case GTIN (EAN/UPC) | 10037332272017 |
| Harmonized System (HS) code | 8504.40.9550 |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, WEEE |
| Operational conditions | |
| Storage temperature (T-T) | -20 - 80 °C |
| Storage relative humidity (H-H) | 10 - 90% |
| Operating temperature (T-T) | 32 - 122 °F |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Weight & dimensions | |
| Package weight | 19 oz (540 g) |
| Package depth | 7" (177.8 mm) |
| Package width | 3.7" (94 mm) |
| Package height | 3.5" (88.9 mm) |
| Weight | 8.82 oz (250 g) |
| Packaging data | |
| Package weight | 19 oz (540 g) |
| Package type | Box |
| Package depth | 7" (177.8 mm) |
| Package width | 3.7" (94 mm) |
| Package height | 3.5" (88.9 mm) |
| Packaging content | |
| Power cord included | Yes |
| Manual | Yes |
| Package type | Box |
| AC adapter included | Yes |
| Number of products included | 1 pc(s) |
| Indication | |
| LED indicators | Yes |
| Logistics data | |
| Master (outer) case width | 14.5" (368.3 mm) |
| Master (outer) case length | 18.9" (480.1 mm) |
| Master (outer) case height | 11.6" (294.6 mm) |
| Master (outer) case gross weight | 35.7 lbs (16.2 kg) |
| Products per master (outer) case | 30 pc(s) |
| Harmonized System (HS) code | 8504.40.9550 |
Product Specs
Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Power Cords
Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.
Saves You Time and Money on Unnecessary Equipment Updates
This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.
Expands Your PoE Network Up to 100 Meters
The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.
Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit to an outlet using the included power supply with the included UK or European power cords. LEDs indicate the unit is receiving power and is ready to transmit data.
Designed for Installation Almost Anywhere
Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.
Key Features
- Saves money by delivering 30W of power + data up to 100 m through existing cabling
- Extends power + data to any PoE or PoE+ device installed where no AC outlet is available
- Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)
- Quick and easy plug-and-play installation with no configuration necessary
- Compact, hand-sized plastic housing ready for mounting on any smooth surface
Description
Adds a PoE Device to Your LAN Without Adding a PoE SwitchNow you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn’t support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling.
Saves You Time and Money on Unnecessary Equipment Updates
This compact PoE+ injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don’t need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor.
Expands Your PoE Network Up to 100 Meters
The NPOE-30W-1G-INT delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, high voltage and overloads.
Simple Plug-and-Play Installation Has Your Device Connected in Minutes
No configuration or software is required to add the NPOE-30W-1G-INT to your LAN. Just connect your switch or network jack to the shielded RJ45 LAN port and your PoE device to the shielded RJ45 POE port using existing Cat5e/6/6a cable. Connect the unit to an outlet using the included power supply with the included UK or European power cords. LEDs indicate the unit is receiving power and is ready to transmit data.
Designed for Installation Almost Anywhere
Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.
Specifications
| Network | |
|---|---|
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
| Power over Ethernet (PoE) | Yes |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Cable types supported | Cat5, Cat5e, Cat6, Cat6a |
| Power over Ethernet (PoE) voltage | 30 V |
| Features | |
| Product colour | Black |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
| Country of origin | China |
| Package type | Box |
| LED indicators | Yes |
| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports | 2 |
| Power | |
| AC adapter output voltage | 53 V |
| Power over Ethernet (PoE) voltage | 30 V |
| Power consumption (typical) | 30 W |
| Input current | 0.75 A |
| AC adapter input voltage | 100 - 240 V |
| AC adapter frequency | 50/60 Hz |
| Technical details | |
| Number of products included | 1 pc(s) |
| Package width | 3.7" (94 mm) |
| Package height | 3.5" (88.9 mm) |
| Power over Ethernet (PoE) | Yes |
| Power consumption (typical) | 30 W |
| Operating temperature (T-T) | 32 - 122 °F |
| Input current | 0.75 A |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Ethernet interface type | Gigabit Ethernet |
| Sustainability compliance | Yes |
| Master (outer) case GTIN (EAN/UPC) | 10037332272017 |
| Harmonized System (HS) code | 8504.40.9550 |
| Compliance certificates | CE, Federal Communications Commission (FCC), REACH, RoHS, WEEE |
| Operational conditions | |
| Storage temperature (T-T) | -20 - 80 °C |
| Storage relative humidity (H-H) | 10 - 90% |
| Operating temperature (T-T) | 32 - 122 °F |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Weight & dimensions | |
| Package weight | 19 oz (540 g) |
| Package depth | 7" (177.8 mm) |
| Package width | 3.7" (94 mm) |
| Package height | 3.5" (88.9 mm) |
| Weight | 8.82 oz (250 g) |
| Packaging data | |
| Package weight | 19 oz (540 g) |
| Package type | Box |
| Package depth | 7" (177.8 mm) |
| Package width | 3.7" (94 mm) |
| Package height | 3.5" (88.9 mm) |
| Packaging content | |
| Power cord included | Yes |
| Manual | Yes |
| Package type | Box |
| AC adapter included | Yes |
| Number of products included | 1 pc(s) |
| Indication | |
| LED indicators | Yes |
| Logistics data | |
| Master (outer) case width | 14.5" (368.3 mm) |
| Master (outer) case length | 18.9" (480.1 mm) |
| Master (outer) case height | 11.6" (294.6 mm) |
| Master (outer) case gross weight | 35.7 lbs (16.2 kg) |
| Products per master (outer) case | 30 pc(s) |
| Harmonized System (HS) code | 8504.40.9550 |
Loading product information from Icecat...
Related products
FAQ
Questions? We're Here to Help.
Can't find what you're looking for? Our team is available through live chat.
Need immediate assistance?
Our sales engineering and accounts team is available Monday through Friday, 9:00 AM to 6:00 PM ET.
Call (315) 930-4535We offer computing hardware, networking equipment, servers and storage, plus power and security products from leading technology brands.
Yes, our team provides pre-sale consultation and post-purchase support to ensure you get the right solutions for your needs.
Return new, undamaged items with all accessories and original packaging within 30 days of delivery. A 20% restocking fee applies to non-defective returns. Defective, damaged or incorrect items are replaced or refunded, with a free return label.
Standard shipping is $25, free on orders over $2,500 in the contiguous US Express is $40, or $350 on orders over $2,500. Alaska and Hawaii ship by air for $85. In-stock orders leave the warehouse within 2-3 business days, standard transit is 5-7 business days and express 1–2 days.
Absolutely! Contact our sales team via live chat, phone, or email to discuss your requirements and receive a customized quote.
Popular Queries
Samsung QM43B-T signage display Digital signage flat panel 43" LED Wi-Fi 500 cd/m² 4K Ultra HD Black Touchscreen Built-in processor Tizen 6.5 24/7
Jabra Speak2 75
NETGEAR CM3000 modem
LG 43UL3Q-E signage display Digital signage flat panel 43" LED Wi-Fi 350 cd/m² 4K Ultra HD Black WebOS 16/7
Sony BZ30P Digital signage flat panel 75" LED 400 cd/m² 4K Ultra HD Black Built-in processor Android 24/7
LG 55UL5Q-M signage display Digital signage flat panel 55" LED Wi-Fi 500 cd/m² 4K Ultra HD Black WebOS 24/7
Sharp LM431 Interactive flat panel 43" LED Wi-Fi 500 cd/m² 4K Ultra HD Black Touchscreen Built-in processor Android 14 18/7
LG 55XS4P signage display Digital signage flat panel 55" LED 4000 cd/m² Full HD Black WebOS 24/7
HPE ProLiant DL380 Gen11 5416S 2.0GHz 16c 1P 2x32GB-R 8SFF MR416i-o 2x960GB SSD 2x1000W PS NA Server
APC SRTL5KRM2UT uninterruptible power supply (UPS) Double-conversion (Online) 4.9 kVA 4900 W 4 AC outlet(s)
StarTech.com ST10GSPEXNDP2 network card Internal Ethernet 10000 Mbit/s
StarTech.com SFP-10G-LR-40-ST network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm
HP Poly Studio V72 USB Video Bar
HP Poly Trio C60 IP Conference Phone for Microsoft Teams and PoE-enabled No Radio GSA/TAA
HP Poly Studio V52 USB Video Bar
View all →