Axiom SSD2558X1TB-AX internal solid state drive 1 TB Serial ATA III 3D TLC

1TB, 3D TLC, SATA-III, C550n Series Mobile SSD, DEVSLP

Key Features

• Silicon Motion 3D TLC Flash controller
• StaticDataRefresh technology ensures data integrity
• SLC caching accelerates burst performance
• Device Sleep mode (DEVSLP) supported for ultra low idle power consumption
• SATA 3.0 (6Gb/s) interface (backwards compatible with SATA 2.0 (3Gb/s) and SATA 1.0 (1.5Gb/s))
• Supports Security Erase
• TRIM support (OS/driver support required)
• High-reliability 3D TLC NAND flash
• S.M.A.R.T. support
• Temperature sensor

Description

The Axiom C550n is a high-performance SATA 6Gb/s SSD ideally suited for cost-effective, small form factor and low power client and industrial storage solutions for PCs, Ultrabooks, Tablet PCs, and other embedded applications. Featuring the Silicon Motion SM2258 controller and quality 3D TLC NAND, these SSDs are loaded with enhancements to promote a high performing and reliable computing environment. TRIM, Wear Leveling, StaticDataRefresh, and LDPC ECC functions optimize data processing efficiency. S.M.A.R.T. and a built-in temperature sensor assist with monitoring drive health.

The 3D TLC SSD provides outstanding transfer speeds. Improved system startup, data access, application loading, and backup times are typically realized when upgrading systems from a traditional spinning disk hard drive to a 3D TLC SSD. SLC Cache is included and further enhances read/write and IOPS ratings. The 3D TLC SSD is an ultra-low-power storage solution with DevSleep support, providing improved notebook battery life and lower cooling costs in datacenters. 3D TLC SSDs are compatible with any operating system and work in both SATA and SAS environments.

Reduced Power Requirements
• No moving parts
• Super-low operating and standby power needs
• Power requirements notably reduced over a typical HD

Fast Performance
• Virtually zero spin up or seek times
• Zero rotational latency
• High sustained data transfer rate Reliable
• No volatile memory elements
• Improved resistance to shock & vibration
• Predictable and manageable failure modes reduce IT costs

Improved Operation
• Noise and vibration free
• Virtually no heat emissions

Specifications

Hard drive
SSD capacity	1 TB
Memory type	3D TLC
Data transmission
Read speed	550 MB/s
Write speed	505 MB/s
Random write (4KB)	80000 IOPS
Random read (4KB)	73000 IOPS
Data transfer rate	6 Gbit/s
Endurance
Mean time between failures (MTBF)	1500000 h
Features
Interface	Serial ATA III
Component for	Laptop
Controller type	SMI SM2258
DevSlp (device sleep) support	Yes
SSD capacity	1 TB
S.M.A.R.T. support	Yes
Read speed	550 MB/s
TRIM support	Yes
Write speed	505 MB/s
ECC	Yes
Memory type	3D TLC
Random write (4KB)	80000 IOPS
Random read (4KB)	73000 IOPS
Mean time between failures (MTBF)	1500000 h
Data transfer rate	6 Gbit/s
Certification	TAA
Power
Power consumption (max)	2.1 W
Power consumption (idle)	0.09 W
Certificates
Certification	TAA
Performance
Interface	Serial ATA III
Component for	Laptop
Controller type	SMI SM2258
DevSlp (device sleep) support	Yes
SSD capacity	1 TB
S.M.A.R.T. support	Yes
Read speed	550 MB/s
TRIM support	Yes
Write speed	505 MB/s
ECC	Yes
Memory type	3D TLC
Random write (4KB)	80000 IOPS
Random read (4KB)	73000 IOPS
Mean time between failures (MTBF)	1500000 h
Data transfer rate	6 Gbit/s
Design
Component for	Laptop
Certification	TAA
Operational conditions
Operating temperature (T-T)	0 - 70 °C
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95%
Operating shock	1500 G
Operating vibration	3.1 G
Technical details
Interface	Serial ATA III
S.M.A.R.T. support	Yes
Operating temperature (T-T)	0 - 70 °C
TRIM support	Yes
Storage temperature (T-T)	-40 - 85 °C
Operating relative humidity (H-H)	5 - 95%
ECC	Yes
Operating shock	1500 G
Operating vibration	3.1 G
Compliance certificates	RoHS
Other features
Compliance certificates	RoHS