Skip to product information
1000BASE-T (RJ-45) to 1000BASE-SX 850nm multimode (LC)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
Transparent Link Pass Through
Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.
Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
Remote Fault Detect
Remote Fault Detect (RFD) is a trouble shooting feature found on Gigabit Ethernet copper-to-fiber media converters. By enabling Remote Fault Detect on the remotely located media converter, the status of the fiber link will be monitored and any link failures will be reported back to the local converter. Should the remote converter lose its fiber RX signal, Remote Fault Detect will force the converter to shut down its fiber TX port. If Link Pass Though is enabled on both ends, then the copper ports will also be shut down to notify both end devices of the link failure.
- Enable Remote Fault Detect on the remote device
- Local end-device will be notified of remote fiber RX loss
Transition Networks
Transition Networks SGETF1039-110-NA network media converter 1000 Mbit/s 850 nm Multi-mode Black
Part number:
SGETF1039-110-NA
$378.22
Shipping time varies based your on location.
Enjoy Free Shipping on orders over $2000 USD
Description
Auto-Negotiation (802.3u) (Copper & Fiber)Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
Transparent Link Pass Through
Transparent Link Pass Through sends a link-loss signal over the fiber, instructing the remote converter to shut down the copper port—thus notifying the end device—while maintaining the fiber link between the two converters.
Automatic Link Restoration
Transition Networks's converters will automatically re-establish link in all network conditions.
Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
Remote Fault Detect
Remote Fault Detect (RFD) is a trouble shooting feature found on Gigabit Ethernet copper-to-fiber media converters. By enabling Remote Fault Detect on the remotely located media converter, the status of the fiber link will be monitored and any link failures will be reported back to the local converter. Should the remote converter lose its fiber RX signal, Remote Fault Detect will force the converter to shut down its fiber TX port. If Link Pass Though is enabled on both ends, then the copper ports will also be shut down to notify both end devices of the link failure.
- Enable Remote Fault Detect on the remote device
- Local end-device will be notified of remote fiber RX loss
Specifications
| Network | |
|---|---|
| Converter input interface | 1000Base-T |
| Maximum data transfer rate | 1000 Mbit/s |
| Fiber optic connector | LC |
| Performance | |
| Wavelength | 850 nm |
| Maximum transfer distance | 21653.5" (550 m) |
| Fiber mode structure | Multi-mode |
| Sensitivity | -17 dBmW |
| Tx power (min) | -9 dBmW |
| Tx power (max) | -4 dBmW |
| Link budget | 8 dB |
| Features | |
| LED indicators | Yes |
| Product colour | Black |
| Internal | No |
| Ports & interfaces | |
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Fiber optic connector | LC |
| Power | |
| Output voltage | 12 V |
| Output current | 0.8 A |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95% |
| Operating altitude | 0 - 118110.2" (0 - 3000 m) |
| Packaging data | |
| Package weight | 31.7 oz (900 g) |
| Technical details | |
| Wavelength | 850 nm |
| Maximum transfer distance | 21653.5" (550 m) |
| Fiber mode structure | Multi-mode |
| Sensitivity | -17 dBmW |
| Tx power (min) | -9 dBmW |
| Tx power (max) | -4 dBmW |
| Link budget | 8 dB |
| Internal | No |
| Weight & dimensions | |
| Dimensions (WxDxH) | 3.23 x 4.8 x 0.984" (82 x 122 x 25 mm) |
| Package weight | 31.7 oz (900 g) |
| Indication | |
| LED indicators | Yes |
| Design | |
| LED indicators | Yes |
| Product colour | Black |
| Certification | FCC A, CISPR22/EN55022 A, EN55024, EN61000, CE |
| Internal | No |
| Colour | |
| Product colour | Black |
| Certificates | |
| Certification | FCC A, CISPR22/EN55022 A, EN55024, EN61000, CE |
| Other features | |
| Link budget | 8 dB |
| Interface | RJ45 |
| Dimensions (WxDxH) | 3.23 x 4.8 x 0.984" (82 x 122 x 25 mm) |