Skip to product information
1-Module, 120VAC, 60Hz, 0.13A, 5W, Wall PS, US Plug, Dying Gasp Support, 1.5 lbs
- 1-Module Power Chassis with external AC adapter power supply or direct DC power
- DC input supports 20 to 60VDC via three pin terminal connector
- Houses all single-slot models of hot-swappable iConverter media converter and switch modules
- NEBS Level 3 Compliant
- Optional wide temperature range of -40 to +60º C
- Management is available with the installation of an iConverter NID plug-in module with integrated management
- Models 8241-X and 8243-X support Dying Gasp (Power Loss Trap) through a management module
- Wall-mount or table-top options
- DIN-rail mounting option available
- Lifetime Warranty and free 24/7 Technical Support
The compact 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter or external DC power source (20 to 60VDC). The 1-Module Power Chassis is designed for network edge, Customer Premises or Central Office deployments where low profile, low cost and flexible upgrades are important.
Any iConverter single-slot module can be installed in the 1-Module Power Chassis and function as a standalone unit. The unit can be rack, wall, or DIN-rail mounted with optional mounting kits.
The chassis supports managed edge demarcation applications when an iConverter Network Interface Device (NID) plug-in module with integrated management (such as the 10/100M2 shown in the photos above) is installed in the chassis. Models with “Dying Gasp” support allow NIDs to send a power failure alarm in the event of power loss.
Omnitron
Omnitron iConverter 1-Module Chassis network equipment chassis
Part number:
8241-1-W
$242.46
Shipping time varies based your on location.
Enjoy Free Shipping on orders over $2000 USD
Description
Features:- 1-Module Power Chassis with external AC adapter power supply or direct DC power
- DC input supports 20 to 60VDC via three pin terminal connector
- Houses all single-slot models of hot-swappable iConverter media converter and switch modules
- NEBS Level 3 Compliant
- Optional wide temperature range of -40 to +60º C
- Management is available with the installation of an iConverter NID plug-in module with integrated management
- Models 8241-X and 8243-X support Dying Gasp (Power Loss Trap) through a management module
- Wall-mount or table-top options
- DIN-rail mounting option available
- Lifetime Warranty and free 24/7 Technical Support
The compact 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter or external DC power source (20 to 60VDC). The 1-Module Power Chassis is designed for network edge, Customer Premises or Central Office deployments where low profile, low cost and flexible upgrades are important.
Any iConverter single-slot module can be installed in the 1-Module Power Chassis and function as a standalone unit. The unit can be rack, wall, or DIN-rail mounted with optional mounting kits.
The chassis supports managed edge demarcation applications when an iConverter Network Interface Device (NID) plug-in module with integrated management (such as the 10/100M2 shown in the photos above) is installed in the chassis. Models with “Dying Gasp” support allow NIDs to send a power failure alarm in the event of power loss.
Specifications
| Power | |
|---|---|
| Power requirements | 100-240VAC, 50/60Hz, 0.19A, 5W |
| Number of power supply units | 1 |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95% |
| Operating altitude | -3937 - 157480.3" (-100 - 4000 m) |
| Weight & dimensions | |
| Width | 3.8" (96.5 mm) |
| Weight | 24 oz (680 g) |
| Height | 1" (25.4 mm) |
| Depth | 5.5" (139.7 mm) |